O
N
L
I
N
E

Online Service

  • W-STANDARD MCU-1500-4S SIMPLE CHARGER

  •   $9.25
  • Freeshipping
  • BrandW-STANDARD
  • Model
  • No preferential activities
  • Quantity
  •   
  • Add to Wishlist
Recommended product
  • Detail11
  • Transaction records(0)
  • Reviews(0)


MCU-1500-4S  SIMPLE CHARGER


Features:

Output short circuit protection

Reverse connection protection

Overcharge protection

Indicator light: Single LED charging saturation cut-off light


Cautions:

This charger is only suitable for LiFePO4 lithium iron phosphate lithium ion battery and polymer

Soft lithium battery and 12V Lead-Acid battery;

The charger may be hot when charging or discharging, so be careful not to burn yourself;

When you stop using it, please unplug the power supply;

Can only be used in normal indoors.


TECHNICAL PARAMETERS

Charger Type: Charging & Storing

Charger for the Battery Type: Lithium Battery & Acid/Lead Battery

Battery: 2/4S Lithium Iron Phosphate battery, capacity 3-40

Shell: 7075 Aluminum, size 118*76*46

Input socket: 3pin AC socket, IEC320-C14

Output socket: alligator clip; American Stack Plug; 6mm ground wire terminal

output wire length: 1.0 Meter 0.5 Square AWG18

Weight: 220g

Input Voltage: AC 100-250V / 47-63Hz

Output Voltage: DC 6V/12V

Charging Voltage / Current: 2S: 7.2-7.4V/1A/3A;  4S:14.4-14.6V/1A/3A

Storage Voltage / Current: 2S: 6.6-6.8V/1A;  4S: 13.2-13.6V/1A

Signal lamp: No-load:

5 flow LED lamps; Normal charge, slide display according to 20%40%60%80%100%; Only 1-4 LED lights be on when storage; Output short circuit or reverse connect: No.5 LED blinks

Buzzer:

Normal on: short beep. Full charge: short voice sounds in every 1 minute. Abnormal situation: quick short sound or continuous ringing.

Environment temperature: -20--70℃、Humidity 20-90%

Storage temperature: -20--70℃、Humidity 20-90%.

Others: AC power allows long-term power supply which wouldn't damage the battery



STEPS FOR USAGE


Step 1.

Connect the power

Turn on the switch, power on beep, flow LED lamps blink normally

Step 2.

Select the battery type and select the charging voltage and current according to suitable charging current type.

Select charging voltage stall, 6V or 12V battery based on the battery voltage,

charging current stall was placed in SLOW location.

Step 3.

Start charging, LED lamp can real-time monitor battery voltage for showing power

Step 4.

End of charging :5 LED lamps stop blink after fully charged, buzzer alarm sounds in every 1minute , and means the battery charge in complete.

Bought notes(bought amounts latest0)

No one bought this product1
Total 0 records, divided into1 pages. First Prev Next Last

User Comment(Total0User Comment Num)

  • No comment
Username: Anonymous user
E-mail:
Rank:
Content:
Verification code: captcha
Total 0 records, divided into1 pages. First Prev Next Last